MIGHTY PURE ULTRAVIOLET WATER PURIFIERS and WATER SANITIZERS
 


120 GPH to 1200 GPH
 

All units listed below are for 120v 60Hz operation.
Contact us directly for MIGHTYPURE 220v 50Hz or 12v DC operations

Model # GPM GPH
MP13 A 2 120
MP16 A 3 180
MP22 A 6 360
MP36 C 12 720
MP49 C 20 1200



Advantages of the Mighty Pure™ - Ultraviolet Water Purification Method

  • Effective - All micro-organisms are susceptible to Mighty Pure ultraviolet disinfection. Effluent is guaranteed to exceed United States Public Health Standards for bacterial purity.
  • Economical - Hundreds of gallons are purified for each penny of operating cost.
  • Safe -   No danger of overdosing; no addition of dangerous chemicals
  • Fast - Water is ready for use as soon as it leaves the purifier: no further contact time required.
  • Easy - Simple installation and maintenance. Compact units require minimum space.
  • Automatic - Provides continuous or intermittent disinfection without special attention or measurement.
  • Chemical Free -   No chlorine taste or corrosion problems.

Principle of Operation for the Mighty Pure - Water Purifiers

Principles of Operation for the Mighty Pure TM Water Purifiers

1. Water enters the purifier and flows into the annular space between the quartz sleeve and the outside
chamber wall.

2. Translucent sight port provides positive indication of germicidal lamp operation.

3. Water leaving the purifier  is instantly ready for use.
 

Specifications for Mighty Pure - Standard Models

Model GPM GPH Inlet/Outlet
Size
Unit Dimensions (Inches) Shipping Data
Length Width Height Gross Wt. Net Wt. Cu. Ft.
MP13 2 120 1/2" NPT 13-1/2" 4-5/16" 8-3/8" 8 lbs. 6 lbs. 1.1
MP16 3 180 3/4" NPT 16-1/2" 4-5/16" 8-3/8" 9 lbs. 7 lbs. 1.2
MP22 6 360 3/4" NPT 22-1/2" 4-5/16" 8-3/8" 14 lbs. 10 lbs. 1.5
MP36B 12 720 1" NPT 36-1/2" 5-11/16" 9-1/2" 25 lbs. 19 lbs. 3.3
MP49B 20 1200 1-1/2" NPT 49-1/2" 5-11/16" 9-1/2" 33 lbs. 21 lbs. 4.3
  • Maximum recommended operating pressure for all purifiers is 100 PSI.
  • Pressure drop at maximum recommended flow rate is 5 PSI or less.
  • All data shown above is for 120 volt 60 Hz. Units are also available for 220 volt 50 Hz and 12 volt DC operation.

Mighty Pure - Installation and Maintenance

The purifier is installed as close as possible to the point of use. Connection of the inlet and outlet to the water supply and insertion of the plug into an ordinary electrical outlet is all that is required. Ordinary maintenance consists of periodic cleaning of the quartz sleeve and annual lamp replacement.

Mighty Pure - Special Features

Stainless Steel Construction
Chamber and hardware are Type 304 stainless steel for dependable long life.

Fused Quartz Sleeve
Insures optimum lamp output at normal potable water temperatures.

Quick Lamp Change
Exclusive, patented Easy-Off TM Retainer Cap enables effortless lamp replacement without 
shut-down of water pressure or drainage of tank. No tools are required.

Optional Equipment
Optional accessories may be obtained at purchase time or added at a later date.

Ster-L-Ray - Lamp Data for Mighty Pure - Water Purifiers

Mighty Pure Lamps

 

Lamp
Number
Purifier
Model No.
Nominal Length Power
Consumption*
Ultraviolet
Output**
Rated
Effective Life
mm inches
05-1400 MP13 227 8-15/16 10 watts 2.3 10,000 Hours
05-1098 MP16 302 11-7/8 14 watts 3.7 10,000 Hours
05-1097 MP22 451 17-3/4 20 watts 6.4 10,000 Hours
05-1343 MP36B 860 33-7/8 39 watts 13.8 10,000 Hours
05-1334 MP49B 1165 45-7/8 50 watts 19.3 10,000 Hours
*Wattage is lamp watts only and does not include ballast loss.
**Maximum rated output at 254 nanometers.

All Mighty Pure™ Water Purifiers employ genuine Ster-L-Ray™ germicidal lamps that afford the maximum efficiency and longevity in producing the required germicidal rays. In addition to the obvious advantages of high efficiency and low power requirements, there is no possibility of the purifier overheating, as is the case with some other types. Consequently the need for additional equipment to combat overheating is eliminated.